Global Silicon Etching Systems Market 2014-2018

Price :
Published : Jan-2014
No. of Pages : 68

Report Description

TechNavio’s analysts forecast the Global Silicon Etching Systems market to grow at a CAGR of 3.59 percent over the period 2013-2018. One of the key factors contributing to this market growth is the rising demand for smartphones and tablets. The Global Silicon Etching Systems market has also been witnessing the emergence of product miniaturization. However, the cyclical nature of the Semiconductor industry could pose a challenge to the growth of this market.

TechNavio’s report, the Global Silicon Etching Systems Market 2014-2018, has been prepared based on an in-depth market analysis with inputs from industry experts. The report covers the APAC region, the Americas, and the EMEA region; it also covers the Global Silicon Etching Systems market landscape and its growth prospects in the coming years. The report also includes a discussion of the key vendors operating in this market.

Key vendors dominating this space are Applied Materials Inc., Hitachi High-Technologies Corp., Lam Research Corp., and Tokyo Electron Ltd.

Other vendors mentioned in the report are Axcelis Technologies Inc., FSI International Inc., GlobalFoundries Inc., Intel Corp., JUSUNG Engineering Co. Ltd., Mattson Technology Inc., SEMES Co. Ltd., Samsung Semiconductor Inc., Semiconductor Manufacturing International Corp., Taiwan Semiconductor Manufacturing Co. Ltd., and United Microelectronics Corp.

Key questions answered in this report:

  • What will the market size be in 2018 and what will the growth rate be?
  • What are the key market trends?
  • What is driving this market?
  • What are the challenges to market growth?
  • Who are the key vendors in this market space?
  • What are the market opportunities and threats faced by the key vendors?
  • What are the strengths and weaknesses of the key vendors?

Table Of Contents

01. Executive Summary

02. List of Abbreviations

03. Scope of the Report
03.1 Market Overview
03.2 Product Offerings

04. Market Research Methodology
04.1 Market Research Process
04.2 Research Methodology

05. Introduction

06. Market Landscape
06.1 Market Size and Forecast by Revenue
06.2 Five Forces Analysis

07. Geographical Segmentation
07.1 Global Silicon Etching Systems Market by Geographical Segmentation 2013-2018
07.2 Silicon Etching Systems Market in the APAC Region
07.2.1 Market Size and Forecast
07.3 Silicon etching Systems Market in the Americas
07.3.1 Market Size and Forecast
07.4 Silicon Etching Systems Market in EMEA
07.4.1 Market Size and Forecast

08. Key Leading Countries
08.1 Taiwan
08.2 South Korea
08.3 The US

09. Buying Criteria

10. Market Growth Drivers

11. Drivers and their Impact

12. Market Challenges

13. Impact of Drivers and Challenges

14. Market Trends

15. Trends and their Impact

16. Vendor Landscape
16.1 Market Share Analysis 2012

17. Key Vendor Analysis
17.1 Applied Materials Inc.
17.1.1 Business Overview
17.1.2 Applied Materials Inc. Business Segmentation 2013
17.1.3 SWOT Analysis
17.2 Hitachi High-Technologies Corp.
17.2.1 Business Overview
17.2.2 Hitachi High-Technologies Corp. Business Segmentation 2013
17.2.3 SWOT Analysis
17.3 Lam Research Corp.
17.3.1 Business Overview
17.3.2 Product Segmentation of Lam Research Corp. 2013
17.3.3 SWOT Analysis
17.4 Tokyo Electron Ltd.
17.4.1 Business Overview
17.4.2 Business Segmentation of Tokyo Electron Ltd. 2013
17.4.3 SWOT Analysis

18. Other Reports in this Series

List of Exhibits

Exhibit 1: Market Research Methodology
Exhibit 2: Global Silicon etching Systems Market 2013-2018 (US$ billion)
Exhibit 3: Revenue Growth Rates for Global Silicon Etching Systems Market 2006-2018
Exhibit 4: Global Silicon Etching Systems Market by Geographical Segmentation 2013
Exhibit 5: Global Silicon Etching Systems Market by Geographical Segmentation 2013-2018
Exhibit 6: Silicon etching Systems Market in the APAC Region 2013-2018 (US$ million)
Exhibit 7: Silicon Etching Systems Market in the Americas 2013-2018 (US$ million)
Exhibit 8: Silicon Etching Systems Market in EMEA 2013-2018 (US$ million)
Exhibit 9: CAGR Comparison between Geographies 2013-2018
Exhibit 10: Silicon Etching Systems Market in Taiwan 2013-2018 (US$ million)
Exhibit 11: Silicon etching Systems Market in South Korea 2013-2018 (US$ million)
Exhibit 12: Silicon Etching Systems Market in the US 2013-2018 (US$ million)
Exhibit 13: CAGR Comparison between Key-leading Countries 2013-2018
Exhibit 14: Global Smartphones Market by Unit Shipment 2012-2018 (million units)
Exhibit 15: Global Tablet Computer Market by Unit Shipment 2012-2018 (million units)
Exhibit 16: Global Silicon Etching Systems Market by Vendor Segmentation 2013
Exhibit 17: Applied Materials Inc. Quarter-wise Geographical Segmentation by New Orders (FY2013)
Exhibit 18: Applied Materials Inc. Quarter-wise Geographical Segmentation by Net Sales (FY2013)
Exhibit 19: Applied Materials Inc. Business Segmentation by New Orders FY2013
Exhibit 20: Applied Materials Inc. Business Segmentation by Net Sales FY2013
Exhibit 21: Hitachi High-Technologies Corp. Business Segmentation by Revenue (FY2013)
Exhibit 22: Hitachi High-Technologies Corp. Sales by Geographical Segmentation (FY2013)
Exhibit 23: Hitachi High-Technologies Corp. R&D Expenditure by Segment Ratio
Exhibit 24: Lam Research Corp. Quarter-wise Revenue (FY 2013)
Exhibit 25: Lam Research Corp. Total Systems Shipments Market-wise
Exhibit 26: Lam Research Corp. Sales by Geographical Segmentation (FY2013)
Exhibit 27: Lam Research Corp. R&D Expenditure (US$ in million)
Exhibit 28: Lam Research R&D Expenditure 2013 (US$ in million)
Exhibit 29: Tokyo Electron Ltd. Business Segmentation by Sales FY2013
Exhibit 30: Tokyo Electron Ltd. R&D Expenditure
Exhibit 31: Tokyo Electron Ltd. Semiconductor Production Equipment Sales by Region (FY2013)
Exhibit 32: Tokyo Electron Ltd. FPD/PV Production Equipment Sales by Region (FY2013)
Exhibit 33: Tokyo Electron Ltd. Electronic Components and Computer Networks Sales by Region (FY2013)

Filed in: Semiconductor & Electronics
Publisher : Infiniti Research Limited
More Reports
Title Price Buy Now

Global Electronic Packaging Market 2015-2019

Electronic packaging involves the use of engineering and other technologies to incorporate in-built security and protective features in the packaging of products. The use of electronics in packaging is gaining importance as it reduces wastage and enhances safety and security, product differentiation, convenience, brand enhancement, and quality assurance. Printed electronics is the primary technology used, which is expected to reduce the cost of electronic packaging dramatically. Overall, the popularity of electronic packaging is increasing with growing awareness among manufacturers. TechNavio's analysts forecast the revenue and volume of the Global Electronic Packaging market to grow at a CAGR of 47.02 percent and 46.26 percent, respectively, over the period 2014-2019. Covered in thi......
$2500

Global Smart Card Market in Government Sector 2015-2019

Smart card is a pocket-sized card, generally made of plastic, which is embedded with integrated circuits or microchips. It is used for authentication, identification, data storage, and application processing. Smart cards are classified into two types: contact-based and contactless. Contact-based smart cards have a contact area of approximately 1 square cm. These cards are inserted into the smart card reader. Contactless smart cards are embedded with integrated circuits that process and store data and communicate with a terminal via radio frequencies. These cards are used by employing a radio frequency between card and the reader that needs no physical insertion of the card. Therefore, contactless smart cards have faster applications and are user-friendly. Contactless smart cards are widely......
$2500

Global Heat Pumps Market 2015-2019

A heat pump is an energy-efficient alternative for an air conditioner and furnace in places where the climatic conditions demand moderate heating and cooling needs. It consumes electric power and transfers heat from one space to another, depending on the climatic condition and its demand for either heating or cooling. Heat pump can be operated at a cost that is almost a quarter of the operating costs for any conventional heating or cooling equipment. It operates with high efficiency, and unlike a traditional HVAC unit, it does not need a separate equipment for heating and cooling. TechNavio's analysts forecast the Global Heat Pumps market to grow at a CAGR of 10.79 percent and 7.06 percent in terms of revenue and units, respectively, over the period 2015-2019. Covered in this Report ......
$2500

Global MEMS Gyroscope Market 2015-2019

MEMS gyroscopes are motion sensors that detect and measure the angular motion of an object. It measures the rate of rotation of an object around a particular axis. 1-axis, 2-axis, and 3-axis gyroscopes, capable of measuring velocity in three directions, are available in the market. Currently, 3-axis gyroscopes are combined with 3-axis accelerometers and 3-axis magnetometers to achieve 9 DOF, and these are generally used in consumer electronics. The increased demand for mobile devices has propelled the growth of the MEMS Gyroscopes market. The cost of MEMS gyroscopes is expected to decline drastically during the forecast period, leading to its increased adoption. TechNavio's analysts forecast the Global MEMS Gyroscope market to grow at a CAGR of 9.1 percent over the period 2014-2019. ......
$2500

Global System-on-chip (SOC) Test Equipment Market 2015-2019

SOC is an integrated circuit consisting of several transistors on a single chip. It finds application in embedded systems. It consists of single or multiple cores of microcontroller, microprocessor, digital signal processor, memory blocks, oscillators, timers and counter-timers, external interfaces, power management circuits, and analog interfaces. The presence of a large number of components on the chip increases the faults in the chip. Thus, the SOC test equipment (used in the back-end process in the semiconductor manufacture before final packaging) plays an important role and ensures fault-free production of chips. Some of the faults that are tested during SOC testing include timing faults, interconnection faults, and electrical interferences. The SOC test equipment helps semiconductor ......
$2500

Global Smart Card Market in the Transportation Sector 2015-2019

A smart card is a pocket-sized card, generally made of plastic, which is embedded with integrated circuits or microchips. It is used for authentication, identification, data storage, and application processing. Smart cards find a wide range of applications in the Transportation sector; they can be used as e-driving licenses or e-passports, and can also be used for payment and ticketing applications such as electronic toll and mass transit. Smart cards provide enhanced security and enable easy management in the Transportation sector. TechNavio's analysts forecast the Global Smart Card market in the Transportation sector to grow at a CAGR of 9.53 percent over the period 2014-2019. Covered in this Report This report covers the present scenario and the growth prospects of the Global S......
$2500

Global Smart Wearable Fitness and Sports Devices and Services Market 2015-2019

A smart wearable fitness and sports device is a device that is worn or attached to a user's body while on use. This device is portable and performs similar functions to that of smartphones and tablets. Important features of this device include real-time fitness monitoring, heart-rate monitoring, sleep statistics, counts the amount of calorie burnt and taken, gym training, monitoring and tracking daily activity of a user to provide valuable health insights. This device is used in various sports such as golf, football, basketball, tennis, and skiing and snowboarding. TechNavio's analysts forecast the Global Smart Wearable Fitness and Sports Devices market and the Global Smart Wearable Fitness and Sports Services market to grow at a CAGR of 25.38 percent and 29.90 percent, respectively, ov......
$2500

Global MEMS Microphone Market 2015-2019

A MEMS microphone consists of a pressure-sensitive diaphragm that is fixed directly into a silicon IC, accompanied by an integrated preamplifier. MEMS microphones are often integrated with modern digital products. It is widely used in high-quality audio output devices. Most smartphones and tablets use MEMS microphones for the high sound quality. Technological advancement has led to the development of advanced miniature MEMS microphones that can be easily integrated into compact electronic devices. In addition, MEMS microphones are also increasingly being used in hearing aids because of their superior noise-suppressing quality. TechNavio's analysts forecast the Global MEMS Microphone market to grow at a CAGR of 16.27 percent over the period 2014-2019. Covered in this Report This re......
$2500

Global Printed Circuit Board (PCB) Market 2015-2019

PCBs are used to mechanically support and electrically connect electronic components through conductive paths. These are commonly used in consumer as well as in high-end commercial electronic devices. In consumer electronic products such as PCs, PCBs are used in motherboards, RAM, and network interface cards. PCBs are also found in other consumer electronics such as TVs, digital cameras, and MP3 players. PCBs are used in high-end commercial electronic equipment such as aerospace and defense electronic products, healthcare equipment, and communications routers. TechNavio's analysts forecast the Global PCB market to grow at a CAGR of 3.43 percent over the period 2014-2019. Covered in this Report The report covers the present scenario and the growth prospects of the Global PCB market......
$2500

Global Contactless Smart Card Market 2015-2019

A smart card is a pocket-sized card, made of plastic, which is embedded with integrated circuits or microchips. It is used for authentication, identification, data storage, and application processing. Smart cards are classified into two types: contact-based and contactless. Contactless smart cards are embedded with integrated circuits that process and store data and communicate with a terminal via radio frequencies. These cards are used by employing a radio frequency between the card and the reader that needs no physical insertion of the card. Therefore, contactless smart cards have faster applications and are user-friendly. Contactless smart cards are widely accepted and used by major sectors such as BFSI, Government, Transportation, Healthcare, and Defense. TechNavio's analysts foreca......
$3000