US Filters Market demand to exceed $12 billion in 2015

2011-12-10

Report Description

US demand to exceed $12 billion in 2015

Demand for filters in the US is expected  to increase to just over $12 billion in 2015. This growth reflects an improvement over the weaker gains registered during the 2005 to 2010 period due to the economic recession that occurred during the latter half of that period. Advances will be spurred by improved manufacturing activity, and motor vehicle production
and sales, as well as strengthened environmental regulations — particularly those involving reduced emissions from electric utilities and diesel engines, and better water quality. Additionally, heightened consumer concerns about air and water quality will boost demand for filters in the residential market.

Aftermarket sales to continue dominant role

Ongoing sales in the aftermarket, which accounts for the majority of demand, will also drive gains. The growing market penetration of such products as motor vehicle cabin air filters, diesel emissions filters, and home air and water filters will contribute to aftermarket demand growth. As the number of filters in operation increases and awareness among consumers of their recommended replacement schedule improves, demand for replacement filters will also increase. However, growth in the aftermarket will be offset somewhat by users’ tendency to replace filters less often than recommended by the manufacturers. The ongoing development of filters featuring longer lasting media or other technologies that extend
their useful life will also restrain sales of aftermarket filters.

Motor vehicles to remain largest market

The motor vehicle market will continue to account for the largest portion of total demand in 2015. Although the high level of price competition in this market will temper gains, advances will be aided by the large volume of these filters sold both as original equipment and in the aftermarket. Demand for filters in the industrial and manufacturing market is projected to post the fastest gains, driven by increased manufacturing activity.

Study coverage

This new Freedonia industry study, Filters, is priced at $5100. It presents historical demand data (2000, 2005 and 2010) plus forecasts for 2015 and 2020 by filter technology, product and market. The study also considers market environment factors, assesses industry structure, evaluates company market share and profiles 38 player

 

Table Of Contents

EXECUTIVE SUMMARY

1 Summary Table

MARKET ENVIRONMENT
General
Macroeconomic Environment
Demographics
Manufacturing Environment
Consumer Spending Environment
Building Construction Trends
Motor Vehicle Outlook
Water Use Trends
Pollution Control Equipment
Pricing
Environmental & Regulator Considerations
Water & Industrial Effluent Regulations
Air Regulations
Other Regulations
Market Trends
Foreign Trade
World Market

LIST OF TABLES & CHARTS:
1 Macroeconomic Indicators
2 Population & Households
3 Manufacturers’ Shipments
4 Personal Consumption Expenditures
5 Building Construction Expenditures
6 Motor Vehicle Indicators
7 Water Withdrawal & Use
8 Pollution Control Equipment Shipments
9 Filter Market, 2000-2010
Cht Filter Market, 2000-2010
10 Foreign Trade in Filters

FILTRATION TECHNOLOGY
General
Conventional Filtration Technology
Fluid Filtration
Air Filtration
Filtration Media
Paper
Fabric
Nonwoven Fabrics
Woven & Knit Fabrics
Other Filter Media
Activated Carbon
All Others
Competitive Technologies
Ion Exchange
Membrane Separation
Distillation
Photo-Oxidation
Ozone Treatment
Chlorine
Chelating Agents & Zeolites

LIST OF TABLES & CHARTS:
1 Filter Demand by Media Type
Cht Filter Demand by Media Type, 2010
2 Paper Media Filter Demand
3 Fabric Media Filter Demand
4 Other Media Filter Demand

PRODUCTS
General
Fluid Filters
Fluid Power Filters
Industrial & Mobile Equipment
Fluid Power Filter
Aerospace Fluid Power Filters
Other Fluid Filters
Municipal & Industrial Fluid Treatment
Consumer Water Treatment
All Other Fluid Filters
Internal Combustion Engine & Related Filters
Oil Filters
Light Duty Oil Filters
Heavy Duty Oil Filters
Air Intake Filters
Light Duty Air Intake Filters
Heavy Duty Air Intake Filters
Fuel Filters
Light Duty Fuel Filters
Heavy Duty Fuel Filters
Cabin Air Filters
Other Internal Combustion Engine
& Related Filters
Emissions Filters
All Other ICE & Related Filters
Air Filters
Panel & Pocket Filters
Low Velocity Filters
High Velocity Filters
Fabric Air Pollution Filters
Cartridge Filters
Electrostatic Air Filters
Air Washer Filters
Other Air Purification Filters

LIST OF TABLES & CHARTS:
1 Filter Supply & Demand
Cht Filter Demand by Type, 2010
2 Fluid Filter Supply & Demand
3 Fluid Power Filter Shipments
Cht Fluid Filter Shipments, 2010
4 Industrial & Mobile Equipment
Fluid Power Filter Shipments
5 Aerospace Fluid Power Filter Shipments
6 Other Fluid Filter Shipments
7 Internal Combustion Engine (ICE)
Filter Supply & Demand
Cht Internal Combustion Engine Filter
Shipments by Type, 2010
8 Internal Combustion Engine
Oil Filter Shipments
9 Internal Combustion Air Intake
Filter Shipments
10 Internal Combustion Engine
Fuel Filter Shipments
11 Internal Combustion Engine Cabin
Air Filter Shipments
12 Other Internal Combustion Engine (ICE)
& Related Filter Shipments
13 Air Filter Supply & Demand
14 Panel & Pocket Air Filter Shipments
15 Fabric Air Pollution Filter Shipments
16 Cartridge Filter Shipments
17 Electrostatic Air Filter Shipments
18 Air Washer Filter Shipments
19 Other Air Filter Shipments

MARKETS
General
Motor Vehicles
Motor Vehicle Aftermarket
Motor Vehicle Aftermarket Filter Users
Motor Vehicle Aftermarket Filter Brands
Motor Vehicle OEM Market
Other Transportation Equipment
Environmental Regulations
Suppliers
Utilities
Electric & Gas Utilities Market
Water & Waste Treatment Market
Consumer
Water
Aftermarket
OEM
Air
Aftermarket
OEM
Industrial & Manufacturing
Equipment & Products
Industrial Pollution Control
Other Markets

LIST OF TABLES & CHARTS:
1 Filter Demand by Market
Cht Filter Demand by Market, 2010
2 Motor Vehicle Market for Filters
3 Motor Vehicle Filter Aftermarket
Cht Motor Vehicle Filter Aftermarket
Demand by User, 2010
4 OEM Market for Motor Vehicle Filters
5 Other Transportation Equipment
Market for Filters
6 Utilities Market for Filters
7 Electric & Gas Utilities Market for Filters
8 Waste & Water Treatment Market for Filters
9 Consumer Market for Filters
10 Water Filter Demand in the Consumer Market
11 Air Filter Demand in the Consumer Market
12 Industrial & Manufacturing Market for Filters
13 Filter Demand in Industrial Equipment
& Manufactured Products
14 Filter Demand in Industrial Pollution Control
15 Other Markets for Filters

INDUSTRY STRUCTURE
General
Industry Composition
Market Share
Competitive Strategies
Research & Development
Distribution
Marketing
Mergers & Acquisitions
Cooperative Agreements

LIST OF TABLES & CHARTS:
1 US Filter Sales by Company, 2010
Cht US Filter Market Share, 2010
2 Selected Acquisitions & Divestitures
3 Selected Cooperative Agreements
company Profiles

Filed in: Environment
More Reports
Title Price Buy Now

Global Carbon Capture and Storage Market in Energy 2015-2019

Carbon capture and storage technology stores and captures man-made CO2 without releasing it into the atmosphere. The CO2 is captured at its source and converted into a concentrated stream for transportation and storage. Carbon capture and storage is an emerging technology, which is gaining popularity as companies have increased their investment because of stringent emission regulations and related penalties. The analysts forecast global carbon capture and storage market to grow at a CAGR of 31.63% over the period 2014-2019. Covered in this Report The report includes the segmentation of the global carbon capture and storage market on the basis of technology, sector, storage type, and geography. The report, Global Carbon Capture and Storage Market 2015-2019, has been prepared bas......
$3000

Global Recycle Market for Plastic Bottle Industry 2015-2019

Recycling of plastic bottles mainly refers to the reuse of the plastic materials and hence to reduce the amount of waste going into landfills by ultimately converting them into lower or same grade plastic bottles. These bottles are used for applications depending on their properties. Most plastics are semi-porous and absorb molecules of food or beverage contained. The residue removal is a very tedious task, and any additional heating may damage plastic. In order to convert plastic bottles into food grade plastic, bottles are hydrolyzed to monomeric form and finally passes through purification and re-polymerization process before converting to a new form. The plastic bottle recycle market is picking up pace and is expected to grow at a steady rate in the near future, boosted by the increasi......
$2500

Global CEMS Market 2015-2019

CEMS is an equipment used to measure emissions discharged from stationary sources. This system is essential for ensuring the mandated reductions of SO2 and NOx under the Acid Rain Program are easily achieved. CEMS helps in the continuous assessment of pollutants discharged into the atmosphere in the form of exhaust gases from combustion or industrial processes. Initially, CEMS was used to monitor oxygen, carbon dioxide, and carbon monoxide. Currently, it is used to adhere to air emission standards. TechNavio's analysts forecast the Global CEMS market to grow at a CAGR of 9.70 percent over the period 2015-2019. Covered in this Report This report covers the present scenario and the growth prospects of the Global CEMS market for the period 2015-2019. The report considers revenue gene......
$2500

Global Smart Waste Market 2015-2019

Smart waste management refers to the management of solid municipal waste from residential societies, streets, public places, commercial buildings, hospitals, and other institutions. It uses smart technologies such as an RFID disposal tag, sensor containers, and vacuum containers, which provide real-time fill measurement of solid municipal waste. Smart containers contain sensors help authorities to manage solid waste collecting routes, which ultimately reduces fuel and service cost. Proper and efficient management of solid municipal waste can mitigate many problems related to pollution, climatic changes, and public health. TechNavio's analysts forecast the Global Smart Waste market to grow at a CAGR of 16.82 percent over the period 2014-2019. Covered in this Report The report cover......
$2500

UV Light Disinfection Market in the US 2015-2019

UV disinfection refers to the process that is used to sterilize the air, water, and F&B. UV disinfection equipment uses UV light for the disinfection process and does not involve the usage of chemicals. Hence, UV disinfection is considered more user-friendly and eco-friendly than other types of disinfection equipment. These advantages are increasing the demand for UV disinfection from end-user segments such as Industries, Commercial Establishments, and Municipal Establishments. TechNavio's analysts forecast UV Light Disinfection market in the US to grow at a CAGR of 13.98 percent over the period 2014-2019. Covered in this Report The report covers the present scenario and the growth prospects of the UV Light Disinfection market in the US for the period 2015-2019. To calculate t......
$2500

Industrial Waste Recycling and Services Market in Europe 2015-2019

Industrial waste recycling and services involve the collection, sorting, recycling, and landfilling. Industries worldwide generate various types of waste, most of which can be reused. Industrial waste includes hazardous and non-hazardous waste. Hazardous waste should be recycled safely and effectively to make it reusable. Waste generators are designed to manage these waste products to mitigate any environmental hazards and harm to human health. Industrial waste recycling and services can be a medium for proper disposal and recovery of waste. TechNavio's analysts forecast the Industrial Waste Recycling and Services market in Europe to grow at a CAGR of 8.2 percent over the period 2014-2019. Covered in this Report This report covers the present scenario and the growth prospects of t......
$2500

Global Ozone Generation Technology Market 2015-2019

Ozone generation is majorly is used for disinfecting water, equipment and sanitising air. It is also used for bio-waste treatment and therapy of diseases such as cancer and AIDS. Ozone may be produced using traditional methods such as corona discharge, UV light and recently by electrolytic method which provides higher purity and concentration. The most common type of ozone generation technology is corona discharge. TechNavio's analysts forecast the Global Ozone Generation Technology market to grow at a CAGR of 7.1 percent over the period 2014-2019. Covered in this Report The Global Ozone Generation Technology market can be segmented into five divisions based on application: Drinking Water, Industrial Water, Waste Water, Air Treatment, and Others. TechNavio's report, the Global ......
$2500

Scrap Recycling Industry in US 2014-2018

Scrap recycling is a process by which old products are recycled into new products or raw materials that are used to manufacture new products. Various materials like ferrous and non-ferrous metals, paper, plastic, textiles, and rubber are recycled and used for further processes like crude steel production, paper manufacturing, plastic manufacturing, and tire manufacturing. Recycled materials reduce landfill waste. Low carbon footprint, less pollution, and reduction in GHG emissions are major advantages of using recycled materials. TechNavio's analysts forecast the Scrap Recycling industry in US to grow at a CAGR of 3.41 percent over the period 2013-2018. Covered in this Report This report covers the present scenario and the growth prospects of the Scrap Recycling industry in US for......
$2500

Global Greenhouse Horticulture Market 2014-2018

Greenhouse horticulture refers to the production of horticulture crops within a structured shelter in order to provide modified growing conditions for the crops. The majority of Greenhouse structures are made from plastic followed by glass and other materials. It facilitates the protection of crops from diseases, pests, and various negative weather conditions. Greenhouse horticulture production has many benefits over conventional crop production techniques thereby providing safer and healthier food. This is one of the major positive factors leading to an increased demand for greenhouse horticulture. TechNavio's analysts forecast the Global Greenhouse Horticulture Market to grow at a CAGR of 9.3 percent over the period 2013-2018. Covered in this Report TechNavio's report, the Globa......
$2500

Global Municipal Solid Waste Management Market 2014-2018

Municipal solid waste management generally refers to the management of solid waste from residential societies, streets, public places, commercial buildings, hospitals, and other institutions. The management of these types of waste is mainly the responsibility of municipal and other governmental authorities. Municipal solid waste management is one of the major problems being faced worldwide. Municipal solid waste is a part of the large universe of waste and mostly includes the waste collected under the formal municipal programs. Proper and efficient management of municipal solid waste can contribute to the mitigation of many problems related to pollution, climatic changes, and public health. TechNavio's analysts forecast the Global Municipal Solid Waste Management market to grow at a CAG......
$2500