Ball Valves Market With COVID-19 & Oil Price Crisis Impact Analysis By Type (Trunnion-mounted, Floating, Rising Stem), Material, Size, End-User (Oil & Gas, Energy & Power, Water & Wastewater Treatment), and Region – Global Forecast to 2025

2020-09-21
Price :
Published : Sep-2020
No. of Pages : 207

The ball valves market was valued at USD 8.1 billion in 2020 and is projected to reach USD 14.7 billion by 2025. It is expected to grow at a CAGR of 12.5% during the forecast period. Increasing demand for valves from healthcare and pharmaceuticals industries due to outbreak of COVID- 19 pandemic, need for replacement of outdated ball valves and adoption of smart valves, rising focus on industrialization, urbanization, and smart city development, and rise in new nuclear power plants projects and upgrade existing ones are the key driving factors for the ball valves market.

“Based on the size, ball valves sized1” to 6” to account the largest share during 2020–2025.”

Several factors need to be considered while selecting the correct valve size for the required application. If the valve size is too small, it will not allow the required flow at the required pressure. Hence, it is essential to select a valve that is 60% and 80% open at the maximum required flow rate, wherever possible, not less than 20% open at the minimum required flow rate. Proper valve size selection helps valve users because it gives a good balance between using as much of the valve’s control range as possible and giving good flow resolution while providing an adequate safety factor. Several key industry players provide software solutions to accurately calculate the valve sizing, along with the trim solution required for the application. The up to 1” and 1” to 6” segments collectively accounted for a large share of the overall ball valves market in 2019, and a similar growth trend is likely to be observed during the forecast period. This growth can be attributed to the increasing demand for ball valves in transportation and energy & power-based applications. The use of 1– 6” ball valves is increasing in the oil & gas, energy & power, water & wastewater treatment, chemicals, and other industries.

“Energy & power end-use industry to witness the highest CAGR during the forecast period.”

In the energy & power industry, there is a strong need to develop infrastructure to address future demands for energy. This need is creating an opportunity for ball valve manufacturers to design and develop their products according to the requirements and standards of the energy & power sector. Power is a basic need for domestic and industrial applications; hence, ball valves are in demand for safety applications and critical operations. APAC is expected to continue to hold the largest size of the ball valves market during the forecast period. Surging demand for energy from the commercial, manufacturing, and residential verticals in emerging economies such as China and India has led to increased investments in power projects in APAC. This will boost the demand for ball valves in the energy & power end-user industry in APAC during the forecast period.

“APAC to record the highest growth rate in ball valves market during the forecast period”

APAC holds the largest share of the global ball valves market. The market in APAC is further segmented into China, India, Japan, South Korea, and Rest of APAC. The growth of the market in APAC can be mainly attributed to the numerous initiatives undertaken by regional governments to encourage the implementation of IoT in the industrial sector in APAC. Dense population, the presence of automotive, chemicals, pharmaceuticals, oil & gas, and metals & mining industries in the region, growing per capita income, and rapid industrialization are the major factors driving the growth of the ball valves market in APAC.

In-depth interviews have been conducted with chief executive officers (CEOs), marketing directors, other innovation and technology directors, and executives from various key organizations operating in the ball valves market place.

  • By Company Type: Tier 1-56%, Tier 2–23%, and Tier 3-21%
  • By Designation: C-Level Executives-75%and Managers-25%
  • By Region: North America-40%, Europe-23%, APAC-26%,and RoW -11%

The ball valves market comprises major players such as Emerson (US), Cameron–Schlumberger (US), Flowserve (US), IMI Plc. (UK), Metso (Europe), Spirax-Sarco (UK), Crane Co. (US), KITZ Corporation (Japan), Trillium Flow Technologies (UK), and BRAY International (US).

The study includes an in-depth competitive analysis of these key players in the ball valves market, with their company profiles, recent developments, and key market strategies.

Research Coverage

The report defines, describes, and forecasts the ball valves market based on type, material, size, end-users, and geography. It provides detailed information regarding factors such as drivers, restraints, opportunities, and challenges influencing the growth of the ball valves market. It also analyzes competitive developments such as product launches, acquisitions, expansions, contracts, partnerships, and developments carried out by the key players to grow in the market.

Key Benefits of Buying the Report

The report will help market leaders/new entrants in this market with information on the closest approximations of the revenue numbers for the overall ball valves market and the sub segments. This report will help stakeholders understand the competitive landscape and gain more insights to better position their businesses and plan suitable go-to-market strategies. The report also helps stakeholders understand the pulse of the market and provides them with information on key market drivers, restraints, challenges, and opportunities.

Filed in: Manufacturing
Publisher : marketsandmarkets
More Reports
Title Price Buy Now

Sterile Medical Packaging Market by Material (Plastics, Metal, Glass, Others), Type (Thermoform Trays, Bottles, Vials & Ampoules, Blister & Clamshells, Others), Application (Surgical Instruments, Pharmaceutical, Others) – Forecast to 2025

 “In terms of value, the sterile medical packaging market is projected to grow at a CAGR of 9.4% between 2020 and 2025.” In terms of value, the sterile medical packaging market size is estimated to be USD 36.9 billion in 2020 and projected to reach USD 57.7 billion by 2025, at a CAGR of 9.4% from 2020 to 2025. Increasing investment, coupled with growth in healthcare industry across the globe is expected to drive the growth of sterile medical packaging market. The recent outbreak of Covid-19 is expected to have a positive impact on the sterile medical packaging market. “The pharmaceutical & biological segment is the projected to lead the sterile medical packaging market during the forecast period.” Based on application, the pharmaceutical & biological application i......
$4950

Industrial Packaging Market by Product type, Material (Paperboard, Plastic, Wood, Metal), Application (Food & Beverage, Building & Construction, Pharmaceutical, Chemical, Automotive, Oil & Lubricant) and Region – Global Forecast to 2025

“Increase in the demand for food & beverage and pharmaceutical globally is projected to drive the overall growth of the industrial packaging market across the globe from 2020 to 2025.” The global industrial packaging market size is projected to grow from USD 58.8 billion in 2020 to USD 72.6 billion by 2025, at a Compound Annual Growth Rate (CAGR) of 4.3%. The global industrial packaging industry has witnessed high growth primarily because of the increasing demand for food & beverage and pharmaceutical products worldwide, especially during the COVID-19 pandemic. Demand for sustainable, and durable protective packaging for pharmaceutical industry is another key factor contributing towards the increasing growth of the industrial packaging market over the next few years. “I......
$4950

Freeze-Drying/ Lyophilization Market by Type (Tray, Shell, Manifold), Scale of operation (Industrial, Lab, Pilot), Application (Food, Pharma & Biotech), Accessories (Loading & Unloading, Monitoring, Vacuum Systems, Drying Chambers) – Global Forecast to 2025

 “Rising demand for lyophilized products in the pharmaceutical and biotechnology industries are driving market growth” The global freeze-drying/lyophilization equipment market is projected to reach USD 7.3 billion by 2025 from USD 4.9 billion in 2020, at a CAGR of 8.2% from 2020 to 2025. The increasing demand for food preservation, rapid growth in contract manufacturing and lyophilization services across the world, rising demand for lyophilized products (especially for the manufacturing of new biologic drugs and injectable formulations), and the technological advancements in lyophilization methods are the major factors driving the growth of this market. On the other hand, the increasing utilization of alternative drying techniques in the pharmaceutical and biotechnology industries ......
$4950

Mist Eliminator Market by Type (Wire-mesh, Vane, Fiber-Bed), End-Use Industry (Oil & Gas, Chemical, Desalination, Power Generation, Pharmaceutical &Medical, Paper & Pulp, Textile, Food & Beverage), Material, Application, Region – Global Forecast to 2025

 “Stringent regulations and growing adoption among end-users are projected to drive the mist eliminators market.” The global mist eliminators market size is projected to grow from USD 953 million in 2020 to USD 1,159 million by 2025, at a compound annual growth rate (CAGR) of 4.0% between 2020 and 2025. Factors, such as stringent regulations pertaining to emission norms, rising adoption in developing countries, growth of the manufacturing sector, increasing production capacity in the chemical industry, and increasing penetration of mist eliminators in coal-fired power plants in developing countries, are supporting the growth of the mist eliminators market. The US, Germany, France, India, and China are the major markets. Due to the COVID-19 pandemic, the demand for mist eliminators ......
$4950

Global Construction Outlook to 2024 (Q3 2020 Update)

Global Construction Outlook to 2024 (Q3 2020 Update) Summary The Global construction industry remains under intense stress amid the COVID-19 crisis. Restrictions on economic activity and country-level lockdowns were widely eased during Q3 2020, and there have been indications that construction output has started to recover from the historic collapse recorded in Q2 2020. There have also been a number of markets that appear to have weathered the COVID-19 crisis better than anticipated, notably the US and Germany. However, the devastating impact that the crisis is having on company earnings and household incomes will continue to constrain investment during the remainder of 2020 and through 2021. GlobalData currently expects global construction output to contract by 3.1% in 2020, and exclud......
$4950

Philippines Packaging Industry – Trends and Opportunities

Philippines Packaging Industry - Trends and Opportunities Summary The Philippines packaging industry was valued 58.7 billion units in 2019 is further anticipated to grow significantly in the years to come. Rigid plastics packaging was the fastest growing pack material between the period 2014-2019. Flexible packaging accounted for the largest share in the packaging industry, followed by glass and rigid plastics packaging in 2019. In the same year, food and non-alcoholic beverages were the leading industries by market share in terms of pack materials. With people getting aware about the environmental impact of packaging materials, along with their hectic lifestyle that demands convenience, consumers prefer products with convenient and sustainable packaging, which in turn is anticipated to ......
$3120

Romania Packaging Industry – Trends and Opportunities

Romania Packaging Industry - Trends and Opportunities Summary The Romanian packaging industry valued 20.6 billion units in 2019 and is further anticipated to grow significantly in the years to come. Flexible packaging accounted for the largest share in the packaging industry while Rigid Plastics was the fastest growing pack material in 2019. In the same year, food and alcoholic beverages were the leading industries by market share in terms of pack materials. With increasing busier consumer lifestyle, there is a upsurge in demand for products which offer convenience, comfort and portability to consumers, which in turn is expected to witness a surge in demand for such packaging materials. This report brings together multiple data sources to provide a comprehensive overview of the Romanian......
$3120

United Arab Emirates (UAE) Packaging Industry – Trends and Opportunities

United Arab Emirates Packaging Industry - Trends and Opportunities Summary The UAE packaging industry valued 10.7 billion units in 2019 and is further expected to grow significantly in the years to come. Rigid plastic packaging accounted for the largest share in the packaging industry and was also the fastest growing pack material in 2019. In the same year, non-alcoholic beverages and food were the leading industries by market share in terms of pack materials. Consumers are increasingly preferring the use of products with convenient and sustainable packaging benefits, which in turn is anticipated to witness a surge in demand for packaging materials. This report brings together multiple data sources to provide a comprehensive overview of the UAE packaging market. It includes market overv......
$3120

China Packaging Industry – Trends and Opportunities

China Packaging Industry - Trends and Opportunities Summary The China Packaging Industry is estimated to grow from 917.0 billion units in 2019 to 1004.9 billion units in 2024, at a CAGR of 1.8%. Rigid metal packaging was the fastest growing pack material during 2019-2024. Rigid Plastics accounted for the largest share in the packaging industry, followed by flexible packaging in 2019. Food and non-alcoholic beverages were the leading industries by market share in the usage of pack materials in 2019. The strong growth of the Chinese packaging industry will be heavily influenced by changing demographics especially in terms of rise in urbanization rate, an aging population, and the increasing trend of consumption of packaging material in the middle class. These changes are expected to drive ......
$3120

Maghreb (Algeria, Morocco and Tunisia) Projects, H2 2020 with COVID-19 impact update – MEED Insights

Maghreb (Algeria, Morocco and Tunisia) Projects, H2 2020 with COVID-19 impact update - MEED Insights Summary With about $200bn of Projects, planned, the three Maghreb markets covered in this report promise a substantial pipeline of potential future business opportunities for project investors, developers, contractors, consultants and manufacturers. The diversified economies of Algeria, Morocco and Tunisia are delivering some of the highest levels of economic growth in the world as they continue their recovery from the dislocation caused by the 2011 political uprisings. Economic development programmes are opening up the markets to private investment, and the governments are developing their manufacturing, tourism and services sectors to create jobs and drive new revenues. The spectre of......
$2000
We use cookies to deliver the best possible experience on our website.
By continuing to use this site, or closing this box, you consent to our use of cookies. To learn more, visit our Privacy Policy