Diesel Power Engine Market by Operation (Standby, Prime, and Peak Shaving), Power Rating (Below 0.5 MW, 0.5-1 MW, 1.0-2 MW, 2.0–5 MW, and Above 5 MW), End User (Industrial, Commercial, and Residential), Speed, and Region – Global Forecast to 2025

2020-07-02
Price :
Published : Jul-2020
No. of Pages : 189

“Increased industrialization, growing demand for reliable backup power supply, and data center investments are set to drive the diesel power engine market”

The global diesel power engine market is estimated to be USD 6.3 billion in 2020 and projected to reach USD 7.9 billion by 2025, at a CAGR of 4.6%. The market has a promising growth potential due to several factors, including increasing industrialization, growing demand for reliable backup power solutions, and data center investments especially in Europe and North America.

Diesel power engines are compression ignition, reciprocating engines and are considered one of the most reliable and capable fossil fuel-based power generation technologies. These engines are coupled with an alternator to generate power as and when demanded. They are utilized for continuous and emergency standby power supply across end users such as oil & gas, mining, petrochemical, data centers, hospital, and commercial buildings. The market growth for diesel power engines can be attributed to the increased demand for reliable backup power, especially from industrial and commercial end users to supply critical loads.

The recent COVID-19 pandemic is expected to impact the global diesel power engine market. a.    COVID-19 outbreak led to large scale shutdown of operations across sectors, and disruption of projects and investments across end use industries. Due to extended lockdown and disruption of operations the end use demand was low, and this was reflected in the 2020 first quarter revenues of both Caterpillar, and Cummins who registered 21%, and 19% decline in revenues respectively

“Standby: The largest segment of the diesel power engine market, by operation“

Standby segment is the largest segment of the diesel power engine market, by operation. Standby diesel engines are used by end users for emergency power supply.Fast-start diesel engines, which can immediately come online and start supplying loads, are preferred in most cases. The demand for these standby diesel engines is more among the end users. Industrial consumers, such as manufacturing and processing plants, rely on these standby diesel engines to maintain higher productivity in case of grid power failures. Sectors with critical loads, such as hospitals, telecom infrastructure, and data centers, require continuous power supply. With the increased industrialization especially in Asia Pacific, the largest market for diesel power engines. These factors are expected to drive the market for diesel power engines globally.

“Commercial: The fastest-growing segment of the diesel power engines market, by end user “

Commercial segment is the fastest-growing segment of the diesel power engine market, by end user. The commercial sector’s demand for diesel engine-powered gen sets arises out of the need for reliable backup power for sectors with critical loads, such as hospitals, data centers, telecom infrastructure, and airports. Other commercial establishments such as malls, shopping complexes, offices, hotels, and warehouses also rely on diesel generator sets for emergency backup power supply.In cases of outages, they always require efficient and reliable power backup. The growth in data center and critical facilities investments, coupled is expected to create huge demand for diesel power engines. The need for reliable and quick backup is expected to propel the demand for diesel power engines in the commercial sector.

“Europe: The fastest-growing region in the diesel power engine market.”

The market growth in this region can be attributed to the growing data center investments especially in countries such as Germany, the UK, and other Nordic Countries. New regulations such as General Data Protection Regulation (GDPR) are expected to contribute to the growth of data centers and thereby create demand for diesel power engines for backup power solutions.

Breakdown of Primaries:

The study contains insights from various industry experts, ranging from distributors to Tier 1 companies and OEMs.

The break-up of the primaries is as follows:

  • By Company Type: Tier I–55%, Tier II–20%, and Tier III–25%
  • By Designation: C-level–20%, Directors–35%, and Others*–45%
  • By Region: Asia Pacific–40%, North America–30%, Europe–20%, Middle East& Africa−8%, South America−2%

*Others include sales managers, marketing managers, product managers, and product engineers.

Note: The tier of the companies is defined based on their total revenue as of 2018;Tier 1: USD 1 billion, Tier 2: from USD 1 billion to USD 500 million, and Tier 3: < USD 500 million.

The diesel power engine market is dominated by few a globally established players such as Caterpillar (US), Cummins (US), Wartsila (Finland), Rolls Royce Holdings (UK), and MAN SE (Germany)

Research Coverage:

The report segments the diesel power engine market and forecasts its size, by volume and value, based on region (Asia Pacific, North America,Europe, Middle East & Africa, and South America), operation (standby, prime, and Peak shaving), end user (industrial, commercial, and residential), power rating (Below 0.5 MW, 0.5-1 MW, 1.0-2 MW, 2.0-5 MW, and Above 5 MW), speed (below 720 rpm, 720-1000 rpm, above 1000 rpm).

The report also provides a comprehensive review of market drivers, restraints, opportunities, and challenges in the diesel power engine market. The report also covers qualitative aspects in addition to the quantitative aspects of these markets.

Key Benefits of Buying the Report:

The report will help the leaders/new entrants in this market with information on the closest approximations of the revenue numbers for the overall market and the sub-segments. This report will help stakeholders understand the competitive landscape and gain more insights to better position their businesses and plan suitable go-to-market strategies. The report also helps stakeholders understand the pulse of the automotive airbags & seat belts market and provides them information on key market drivers, restraints, challenges, and opportunities.

Filed in: Manufacturing
Publisher : marketsandmarkets
More Reports
Title Price Buy Now

Process Automation & Instrumentation Market by Instrument (Field Instrument, Control Valve, Analytical Instrument), Solution (APC, DCS, HMI, MES, PLC, Functional Safety, SCADA), Industry, and Geography – Global Forecast to 2025

“Process automation and instrumentation market to exhibit significant growth potential from 2020 to 2025” The process automation and instrumentation market is expected to be valued at USD 67.4 billion in 2020 and is projected to reach USD 76.8 billion by 2025, at a CAGR of 2.6%. Increasing importance of reduced operating costs and production efficiency, adoption of digital technologies such as IIoT, increased adoption of industrial automation and process control, and optimum utilization of resources are expected to be the key factors propelling the growth of the process automation and instrumentation market. “DCS segment to account for largest share in global process automation and instrumentation market” DCS is a digital automated industrial control system (ICS) that uses......
$4950

Modular Construction Market by Type (Permanent, Relocatable), Material (Steel, Concrete, Wood), Modules, End-Use (Residential, Retail & Commercial, Education, Healthcare, Office, Hospitality), and Region – Global Forecast to 2025

“The growth of modular construction market is attributed to increase in concern towards work-zone safety, need for lower environmental impacts, and supportive government initiatives.” The global modular construction market size is projected to grow from USD 85.4billion in 2020 to USD 107.9billion by 2025, at a Compound Annual Growth Rate (CAGR) of 5.7%. Critical trends in the construction industry, such as shorter project schedules, housing shortage in many countries, economic construction demand, and workforce shortages, are the factors that are driving the growth of the volumetric modular construction method. “In terms of value & volume, Permanent modular building is estimated to dominate the modular construction market in 2019.” Permanent modular construction (PMC) ......
$4950

Industrial Valves Market With COVID-19 & Oil Price Crisis Impact Analysis By Function (On-off/Isolation, Control), Material, Type, Size, End-User (Oil & Gas, Energy & Power, Water & Wastewater Treatment), and Region – Global Forecast to 2025

“Control valves to witness a higher CAGR during the forecast period.” The global industrial valves market size was valued at USD 48.1 billion in 2020 and is projected to reach USD 85.7 billion by 2025. It is expected to grow at a CAGR of 12.3% during the forecast period. Rapid developments in electronics have resulted in the introduction of advanced control systems and state-of-the-art actuator/valve combinations that are now installed in new plants. Through connected networks, monitoring of valve conditions, and predicting impending valve deterioration is possible. This, in turn, reduces the unplanned/accidental shutdown of plants and leads to the rising adoption of control valves. Various critical /severe service applications make use of control valves where manual operation is ei......
$4950

Biodegradable Films Market by Type (PLA, Starch Blends, Biodegradable Polyesters, PHA), Applications (Food Packaging, Agriculture & Horticulture, Cosmetic & Personal Care Products Packaging, Industrial Packaging), and Region – Global Forecast to 2025

High demand from food packaging industry and shift in consumer preference toward eco-friendly plastic products is driving the demand for biodegradable films market The global biodegradable films market size is estimated to be USD 1.1 billion in 2020 and projected to reach USD 1.5 billion by 2025, at a CAGR of 6.6%. The growing awareness regarding plastic waste and its adverse impact on the environment is one the primary factors driving market growth. Moreover, factors like growing demand from the food packaging industry, and high demand from the agriculture & horticulture sector are also contributing toward the market growth of biodegradable films. “PLA is estimated to lead the biodegradable films market, by type in terms of volume during the forecast period By type, PLA is ......
$5650

Manufacturing Execution System Market with COVID-19 Impact by Offering (Software, Services), Deployment (On-premises, On-demand, Hybrid), Process Industry (Food & Beverages, Pharmaceuticals & Life Sciences), Discrete Industry, Geography – Global Forecast to 2025

“Manufacturing execution system market to grow at a CAGR of 4.5% from 2020 to 2025” The manufacturing execution system market is expected to grow from USD 11.9 billion by 2020 to USD 14.5 billion by 2025 at a CAGR of 4.5% from 2020 to 2025. A few key factors driving the growth of this market include increasing use of industrial automation in process and discrete industries,growing importance of regulatory compliance, fiscal policies formulated by regional financial institutions to keep manufacturing facilities floating amidst COVID-19 crisis,and low deployment cost of MES solutions. “Manufacturing execution system market for on-premise deployment to hold larger share during forecast period” The manufacturing execution system market for on-premise deployment holds a larger ......
$4950

Synthetic Paper Market by Raw Material (BOPP, HDPE), Application (Printing, Paper Bags, Labels), End-use Industry (Paper, Packaging), and Region (APAC, Europe, North America, Middle East & Africa, South America) – Global Forecast to 2025

The global synthetic paper market is projected to register a CAGR of 9.2% between 2020 and 2025, in terms of value. The global global synthetic paper market size is projected to grow from USD 526 million in 2020 to USD 819 million by 2025, at a CAGR of 9.2% between 2020 and 2025. Eco-friendly synthetic paper and wide application areas of synthetic paper are driving the market. However, limited plastics material available for synthetic paper is expected to restrain this market. Increasing concerns of pulp paper for environment pollution is expected to offer significant growth opportunities to the synthetic paper manufacturers. A major challenge faced by the players in this market is the cost of synthetic paper being higher than pulp paper. The BOPP segment is expected to grow at the h......
$4950

Fiber Cement Market by Material (Portland Cement, Application (Siding, Molding & Trim, Backer boards, Flooring, Roofing, Wall Partitions), End use (Residential, Non-residential) and Region – Global Forecast To 2025

“Increase in the demand for non-residential construction activities is projected to drive the over all growth of the fiber cement market across the globe from 2020 to 2025.” The global fiber cement market size is projected to grow from USD 16.4 billion in 2020 to USD 20.3 billion by 2025, at a Compound Annual Growth Rate (CAGR) of 4.4%. The global fiber cement industry has witnessed high growth primarily because of the increasing demand for energy-efficient buildings worldwide. Increase in the government regulations on use of asbestos is another key factor contributing to the rising growth of the fiber cement market over the next few years. “In terms of both volume, cellulosic material (fiber) segment to lead the fiber cement market by 2025.” Cellulosic material (fiber)seg......
$4950

Global Construction Outlook to 2024 (Q2 2020 Update)

Global Construction Outlook to 2024 (Q2 2020 Update) Summary The global construction industry has been under intense stress in recent months amid the COVID-19 crisis and associated containments measures to prevent the continued spread of the virus. Even in countries where the construction industry has been permitted to continue, being exempt from restrictions on general business activity, there has still been widespread disruption and temporary shut downs of construction sites. Reflecting the severe impact on the industry, rovisional data for some major markets in Europe reveal that construction output plummeted in April during the peak of the pandemic in the region, with Italy recording a 68% year-on-year drop, and France a 60% decline. Such unprecedented declines are expected in other......
$4950

Packaging Preferences during COVID-19 Lockdown for weeks 1-10 (Consumer Survey Insights)

Packaging Preferences during COVID-19 Lockdown for weeks 1-10 (Consumer Survey Insights) Summary This report is part of the GlobalData COVID-19 Consumer Insight series, which tracks changes in consumer sentiment, lifestyles, attitudes, and behaviors stemming from the global coronavirus outbreak. The consumer insight offered throughout the report is drawn from GlobalData's Coronavirus (COVID-19) Tracker Consumer Survey, a weekly survey that was carried out in 11 countries starting from March 25 2020. This report focuses on consumers' attitudes and preferences towards packaging types and sizes during COVID-19. Scope - COVID-19 has changed many previous trends. - Consumers who are stockpiling or buying more than before are normally doing so with non-perishables. - Consumers are buying pr......
$1450

Self-Adhesive Labels Market by Composition (Facestock, Adhesive, Release Liner), Type (Release Liner, Linerless), Nature (Permanent, Repositionable, Removable), Print Technology, Application, and Region – Global Forecast to 2025

“Increase in demand for packaged & convenience food and ready-to-eat meals is projected to drive the self-adhesive labels market across the globe from 2020 to 2025.” The global self-adhesive labels market size is projected to grow from USD 46.5 billion in 2020 to USD 59.2 billion by 2025, at a compound annual growth rate (CAGR) of 4.95%. The growth is primarily because of the increasing demand for packaged food products worldwide. Factors such as rapid urbanization, demand for pharmaceutical supplies, increasing consumer awareness, and growth of the e-commerce industry have driven the market. With the increasing demand for convenience and quality food products, people are opting for packaged food products, where the product information and other details such as nutritional value......
$4950
We use cookies to deliver the best possible experience on our website.
By continuing to use this site, or closing this box, you consent to our use of cookies. To learn more, visit our Privacy Policy