Ozone Generator Market by Technology (Corona Discharge, Ultraviolet Radiation, Radiochemical, Electrolysis), Application (Water Purification, Air Purification, Food Processing, Organic Synthesis, Others), Region – Global Forecast to 2025

2020-09-24
Price :
Published : Sep-2020
No. of Pages : 200

“The ozone generator market is projected to grow at a CAGR of 6.2% from 2020 to 2025, in terms of value.”

The global ozone generator market size is projected to grow from USD 1.0 billion in 2020 to USD 1.4 billion by 2025, at a CAGR of 6.2% during the forecast period 2020 to 2025. Increased non conventional applications of ozone such as extrusion coatings and increasing demand for ozone generators from end use industries such as food & beverages, chemical, pulp & paper, pharmaceutical, among others is expected to accelerate the growth of the ozone generator market.

“The pulp bleaching application segment is projected to grow at the highest CAGR during the forecast period.”

Based on application, the pulp bleaching segment is projected to grow at the highest CARG during the forecast period. Ozone bleaching is one of the key technologies considered for total chlorine-free (TCF) or elemental chlorine-free (ECF) pulp production. Ozone bleaching is usually conducted in medium consistency pulp and relatively low pH.

Benefits of ozone in pulp bleaching:

  • Chlorine and chlorine dioxide are replaced
  • Adsorbable organic Halide (AOX) is reduced or eliminated
  • BOD/COD is lowered, and the effluent color is reduced
  • Higher process water cycling rate can be achieved

Advantages of ozone over chlorine for pulp bleaching is expected to drive the growth of ozone generator market in the pulp bleaching segment.

“The corona discharge technology segment is projected to grow at the highest CAGR during the forecast period.”

Based on the technology, the corona discharge segment is projected to grow at the highest CAGR during the forecast period. Corona discharge ozone generator is used for both industrial and commercial applications. The growth can be attributed to the advantages of corona discharge technology over other materials. This technology is cost-effective and has comparatively low maintenance.

Some of the advantages of corona discharge ozone generators are as follows:

  • Efficient generation of ozone in large volume
  • Cost-effective ozone generation for large-scale high concentration installations
  • No byproducts
  • Lifespan exceeds ten years

Such advantages are expected to fuel the growth of the ozone generator market.

“Asia Pacific is projected to grow the highest CAGR in the ozone generator market during the forecast period.”

Asia Pacific is projected to grow at the highest CAGR in the ozone generator market from 2020 to 2025.  China, India, and Japan are witnessing rapid industrial, manufacturing, and infrastructural growth. Some of the economies in Asia Pacific have tremendous market potential in terms of rising population, favorable government policies, and industrial growth. The region is attracting investors to set up production facilities because of the availability of raw materials and labor at lower prices. It has witnessed significant growth in manufacturing activities due to low manufacturing costs and support of the local governments. Increasing investments in R&D activities related to wastewater treatment are driving the growth of the ozone generator market in the Asia Pacific region. According to the International Monetary Fund (IMF), China and India are the two fastest-growing economies in the world. This economic growth is expected to increase industrial activities in these countries, leading to increased demand for treated water. This, in turn, is expected to fuel the ozone generator market in the region. Factors expected to fuel the growth of the Asia Pacific ozone generator market include increasing population, rapid urbanization, increasing focus on maintaining high-quality municipal water supplies, industrialization, and stringent regulations related to the waste water treatment.

Profile break-up of primary participants for the report:

  • By Company Type: Tier 1 – 45%, Tier 2 – 22%, and Tier 3 – 33%
  • By Designation: C-level Executives – 50%, Directors – 10%, and Others – 40%
  • By Region: Asia Pacific – 17%, Europe – 25%, North America – 33%, Middle East & Africa- 8%, and South America – 17%

Furthermore, as a part of the qualitative analysis of the ozone generator market, the research provides a comprehensive review of drivers, restraints, opportunities, and challenges influencing the growth of the market across the globe. It also discusses competitive strategies adopted by the leading market players such as SUEZ Water Technologies & Solutions (France), Xylem (US), Mitsubishi Electric Corporation (Japan), Ebara Corporation (Japan),  Toshiba Corporation (Japan), METAWATER Co., Ltd. (Japan), Industrie De Nora S.p.A. (Italy), Spartan Environmental Technologies (US), MKS Instruments (US), Teledyne API (US), Creative Oz-Air (I) Pvt Ltd (US), Corotec Corporation (US), Ozonetech Systems OTS AB (Sweden), Absolute Systems Inc (China), Lenntech (Netherlands), Chemtronics Technologies Pvt. Ltd. (India), International Ozone (US), Faraday Ozone (India), Ecozone Technologies Ltd. (Israel), ESCO International Ltd (UK), Taoture International Enterprises Inc. (US), Ozonefac Limited (China), Enaly Ozone Generator (China), Jinan Sankang Envi-tech Co., Ltd (China), Biotek Environmental Science Ltd. (Taiwan), Shandong Nippon Photoelectricity Equipment Co., Ltd (China), Eltech Ozone (India), BiOzone Corporation (US), Dongguan Beelee Electronics Co., Ltd. (China), Fujian Newland EnTech Co. Ltd. (China), Medozons Ltd. (Russia), Ozonetek Limited (India), and Pinnacle Ozone Solutions, LLC (US), among others.

Research Coverage:

The report defines, segments, and projects the size of the ozone generator market based on application, technology, and region. It strategically profiles the key players and comprehensively analyzes their market share and core competencies. It also tracks and analyzes competitive developments such as expansions, new product developments, contracts, and joint ventures undertaken by them in the market.

Reasons to buy the Report:

The report is expected to help the market leaders/new entrants in the market by providing them the closest approximations of revenue numbers of the ozone generator market and its segments. This report is also expected to help stakeholders obtain an improved understanding of the competitive landscape of the market, gain insights to improve the position of their businesses, and make suitable go-to-market strategies. It also enables stakeholders to understand the pulse of the market and provide them information on key market drivers, restraints, challenges, and opportunities.

Filed in: Chemicals
Publisher : marketsandmarkets
More Reports
Title Price Buy Now

Face Mask Market by Nature (Disposable, Reusable), Type (Surgical, Respirator, Others), End-Use (Hospitals & Clinics, Industrial & Institutional, Personal/Individual Protection), and Region – Global Forecast to 2025

“Surgical type segment of the face mask market is projected to grow at the highest CAGR during the forecast period of 2020 to 2025” The face mask market is projected to grow from USD 737 million in 2019 to USD 22,143 million in 2021 and then reduce to USD 3,021 million by 2025. The projected CAGRs for these time periods are 448.1% between 2019 to 2021 and an overall CAGR of -48.9% from 2020 to 2025. The primary reasons driving the demand for face mask globally, includes factors like the outbreak of COVID-19 pandemic, the rise in consumer awareness pertaining to the importance of face masks, and the surge in social media marketing to encourage a positive attitude towards wearing masks. The surgical type segment of the face mask market is projected to grow at the highest CAGR durin......
$5650

Plastic Caps and Closures Market by Product Type (Screw-on Caps, Dispensing Caps), Technology (Injection Molding, Compression Molding, Post-mold TE Band), Raw Material (PP, HDPE, LDPE), End-use (Beverage, Pharmaceutical), Region – Global Forecast to 2025

The global plastic caps & closures market is projected to register a CAGR of 5.2% between 2020 and 2025, in terms of value. The global plastic caps and closures market size is projected to grow from USD 44.3 billion in 2020 to USD 57.0 billion by 2025, at a CAGR of 5.2% between 2020 and 2025. Increase in demand for bottled water, need for convenience, concerns about product safety & security, product differentiation & branding, and decreasing package sizes are driving the market for plastic caps & closures. However, the development of substitutes is expected to restrain this market. Emerging economies are expected to offer significant growth opportunities to manufacturers of plastic caps & closures. The major challenge faced by players is the mature market in develop......
$4950

Humic-based Biostimulants Market by Type (Humic Acid, Fulvic Acid, and Potassium Humate), Mode of Application (Foliar Treatment, Seed Treatment, and Soil Treatment), Formulation, Crop Application, and Region – Global Forecast to 2025

The humic-based biostimulants market is projected to grow at a CAGR of 10.5% from 2020 to 2025. The global humic-based biostimulants market size is estimated to be valued at USD 515 million in 2020 and projected to reach USD 848 million by 2025, recording a CAGR of 10.5%. Factors such as the demand for adoption of sustainable agriculture solutions, limited entry barriers for new manufacturers, and and rapid growth in organic farming are projected to drive the growth of this market. The humic acid segment is projected to be the largest segment,by type,in the humic-based biostimulants market during the forecast period. Humic acid is the most widely found element and thus dominates the global humic-based biostimulants market by type. Humic acid biostimulant products are provided by v......
$5650

Carbon Capture, Utilization, and Storage Market by Service (Capture, Transportation, Utilization, Storage), End-Use Industry (Oil & Gas, Iron & Steel, Cement, Chemical & Petrochemical, Power Generation), and Region – Global Forecast to 2025

“The carbon capture, utilization, and sequestration market is projected to register a CAGR of 17.0% during the forecast period.” The global carbon capture, utilization, and storage market size is expected to grow from USD 1.6 billion in 2020 to USD 3.5 billion by 2025, at a CAGR of 17.0% during the forecast period. Carbon capture, utilization, and sequestration is extensively used in oil & gas, power generation, fertilizer, and various other sectors. Increasing usage of captured carbon for enhanced oil recovery operations in the oil & gas industry is laying a key role behind the growth of CCUS market. “Capture segment to dominate the market in terms of value.” The Capture segment holds the majority of the share in the CCUS market. Carbon capture is the first stage ......
$5650

Polyimide Films and Tapes Market by Application (Flexible Printed Circuits, Specialty Fabricated Products, Pressure Sensitive Tapes, Motors/Generators, Wires/Cables), End-Use Industry – Global Forecast to 2025

“The polyimide films and tapes market is projected to grow at a CAGR of 7.9% from 2020 to 2025, in terms of value” The polyimide films and tapes market is estimated to be USD 1.4 billion in 2020 and is projected to reach USD 2.1 billion by 2025, at a CAGR of 7.9% from 2020 to 2025. Increased demand from the electronics industry, the growing automotive industry, and superior thermal & mechanical properties of polyimide films in comparison to other polymers are key factors driving the growth of this market. The high cost of polyimide films and tapes acts as a key restraint to market growth. “Flexible printed circuits are the largest application segment of the polyimide films and tapes market” By application, the flexible printed circuits segment accounted for the largest......
$4950

Liquid Adhesives Market by Technology (Water-based, Solvent-based, Reactive& Others), End-Use Industry (Paper, Packaging & Related Products, Building & Construction, Medical, Assembly & Others), Region – Global Forecast to 2025

The liquid adhesives market is projected to register a CAGR of 4.5%, in terms of value, between 2020 and 2025. The liquid adhesives market is projected to grow from USD 35.8 billion in 2020 to USD 44.6 billion by 2025, at a CAGR of 4.5%, between 2020 and 2025. The liquid adhesives market depends heavily on the performance of paper, packaging & related products, building & construction, medical, assembly & other industries.Liquid adhesives have low viscosity. The wetting properties of these adhesives enable to hold the substrate so that molecular contact between the substrate and adhesive is activated. The water-based segment is expected to hold the largest share of the overall liquid adhesives market during the forecast period. Based on technology, the liquid adhesives......
$5650

Global Ammonia Capacity and Capital Expenditure Outlook, 2020-2030 – India and Russia to Lead Globally in Terms of Ammonia Capacity Additions

Global Ammonia Capacity and Capital Expenditure Outlook, 2020-2030 - India and Russia to Lead Globally in Terms of Ammonia Capacity Additions Summary Global ammonia capacity is poised to see considerable growth over the upcoming years, potentially increasing from 235.34 million tonnes per annum (mtpa) in 2019 to 289.83 mtpa in 2030. Around 107 planned and announced plants are slated to come online in the upcoming years, primarily in Asia and the Middle East. Scope - Global ammonia capacity outlook by region - Ammonia planned and announced plants details - Global ammonia capacity by feedstock - Capacity share of the major ammonia producers globally - Global ammonia capital expenditure outlook by region Reasons to Buy - Understand key trends in the global ammonia industry - Under......
$3000

Global Petrochemical Capacity and Capital Expenditure Outlook, 2020-2030 – Asia Leads Global Petrochemical Capacity Additions

Global Petrochemical Capacity and Capital Expenditure Outlook, 2020-2030 - Asia Leads Global Petrochemical Capacity Additions Summary Global petrochemical capacity is poised to see considerable growth over the upcoming years, potentially increasing from 2,129.0 million tonnes per annum (mtpa) in 2019 to 3,029.1 mtpa in 2030. Around 2,004 planned and announced plants are slated to come online by 2030, primarily in Asia and the Middle East. Scope - Global petrochemicals capacity outlook by region - Petrochemicals planned and announced plants details - Global petrochemicals capacity by commodity - Capacity share of the major petrochemicals producers globally - Global petrochemicals capital expenditure outlook by region Reasons to Buy - Understand key trends in the global petrochemicals......
$3000

Liquid Applied Membranes Market by Type (Bituminous, Elastomeric, Cementitious), Application (Roofing, Walls, Building Structures, Roadways), End-Use Industry (Residential, Commercial, Public Infrastructure), and Region – Global Forecast to 2025

Increasing spending on infrastructure activities is expected to drive the overall growth of the LAMs market The global liquid applied membranes (LAMs) market size is expected to grow from USD 18.5 billion in 2020 to USD 24.6 billion by 2025, at a Compound Annual Growth Rate (CAGR) of 5.8% during the forecast period. The LAMs market is driven by various factors, such as high demand from the construction, growing demand for energy-efficient buildings, and increasing water management activities in APAC. However, the availability of sheet based membranes can hinder the growth of the market for specific applications. The elastomeric membranes segment is expected to grow at a higher CAGR during the forecast period The elastomeric membranes segment is the fastest-growing in the LAMs mark......
$4950

Antimicrobial Hospital Textiles Market by Material, Usability (Disposable, Reusable), FDA Class (Class I, Class II, Class III), Application (Attire, Surgical supplies & Wipes, Sheets & Blankets), Hospital Department, Region – Global Forecast to 2025

“Growth in the market is backed by the increasing healthcare expenditure by governmental authorities, the growing healthcare industry, and the increasing awareness of consumers regarding health & hygiene.” The global antimicrobial hospital textiles market size is projected to grow from USD 7.1 billion in 2020 to USD 9.4 billion by 2025, at a CAGR of 5.8%. The antimicrobial hospital textiles market is witnessing high growth owing to growth in per capita income level, increasing affordability of healthcare services, and due to COVID-19. The demand for antimicrobial hospital textiles is rising due to the increased awareness about hygiene, rising disposable income, changing lifestyle, growing concern about health, and increasing pollution. The growth of the healthcare industry is......
$5650
We use cookies to deliver the best possible experience on our website.
By continuing to use this site, or closing this box, you consent to our use of cookies. To learn more, visit our Privacy Policy