Green Ammonia Market by Technology (Alkaline Water Electrolysis (AWE), Proton Exchange Membrane (PEM), and Solid Oxide Electrolysis (SOE)), End User (Transportation, Power Generation, and Industrial Feedstock), and Region – Global Forecast to 2030

2020-07-07
Price :
Published : Jul-2020
No. of Pages : 159

“The global green ammonia market is projected to grow at a CAGR of 54.9% from 2020 to 2030”

The global green ammonia market is projected to reach USD 852 million by 2030 from an estimated USD 11 million in 2020, at a CAGR of 54.9% during the forecast period. Rising obligations to reduce green house gas emissions from traditional ammonia methods has driven the global green ammonia market growth.Furthermore, increased agriculture production and subsequent rise in fertilizer consumption is driving the green ammonia market. However, higher initial capital requirements for green ammonia plant infrastructures is likely to hamper the growth of green ammonia market.

“The power generation segment, by end user, is expected to be the largest and the fastest growing market from 2020 to 2030”

The end user segment is categorized as transportation, power generation, and industrial feedstock.The power generation segment is expected to grow at the highest CAGR during the forecast period, as electricity generated by using green ammonia is observed to be the cleaner version of gas. By using the electrolysis process, surplus renewable energy generated at isolated locations can be used to produce carbon-free ammonia, which can act as a sustainable fuel for power generation. Furthermore, the need for long term storage of renewable energy generated at isolated wind farms and solar panels drives the growth of green ammonia market.Europe is expected to hold the largest power generation market. This growth is owing to the favourable government initiatives and plans to produce green ammonia in Netherlands.

“The Solid Oxide Electrolysis segment, by technology, is expected to be the fastest growing market from 2020 to 2030”

The SOE segment is expected to be the fastest growing technology sub segment during the forecast period, owing to the increasing demand for fuel cells. The SOE process is used to produce green hydrogen from surplus electricity generated from renewable sources. Such green hydrogen can be synthesise further in ammonia synthesis plant to produce green ammonia by using SOE technology. Moreover, the green hydrogen produced by the process can be stored and used as a fuel cell, and reconverted into electricity again when the demand arises. This allows the storage of electricity when production exceeds demand. This is driving the growth of the SOE segment in the global green ammonia market. Europe is projected to hold the largest SOE market by 2030, owing to the rising de and for fuel cells in Germany.

“Europe: The largest and the fastest growing region in the green ammonia market.”

Europe is expected to dominate the global green ammonia market between 2020 and 2030. The increasing number of fuel cell projects and European government initiatives for the deployment of fuel cells in the residential and commercial sectors are likely to provide growth opportunities for the growth of the green ammonia market in the region. Fuel cells are an efficient and clean energy alternative, which has the potential to address the energy challenges of the region. The Fuel Cells and Hydrogen Joint Undertaking is the primary body that supports R&D for fuel cell and hydrogen technologies in Europe.

Breakdown of Primaries:

In-depth interviews have been conducted with various key industry participants, subject-matter experts, C-level executives of key market players, and industry consultants, among other experts, to obtain and verify critical qualitative and quantitative information, as well as to assess future market prospects.

The distribution of primary interviews is as follows:

  • By Company Type: Techology Providers- 60%, Ammonia Producers- 25%, and Ammonia Plant EPC companies- 15%
  • By Designation: C-Level- 30%, Director Level- 25%, and Others- 45%
  • By Region: Asia Pacific- 30%, Europe- 25%, North America- 25%, and Rest of the World- 20%

Note: Others includes sales managers, marketing managers, product managers, and product engineers.

The green ammonia market is dominated by a few major players that have a wide regional presence. The leading players in the gren ammonia market are Siemens (Germany), MAN Energy Solutions (Germany), ITM Power (UK), Nel Hydrogen Solutions (Norway), Yara International (Norway) and Haldor Topsoe (Denmark).

Study Coverage:

The report defines, describes, and forecasts the green ammonia market, by technology, end user and region. It also offers a detailed qualitative and quantitative analysis of the market. The report provides a comprehensive review of the major market drivers, restraints, opportunities, and challenges. It also covers various important aspects of the market, which include the analysis of the competitive landscape, market dynamics, market estimates in terms of value, and future trends in the  green ammonia market.

Key Benefits of Buying the Report

  • The report identifies and addresses the key markets for green ammonia operations and services, which would help equipment manufacturers and service providers review the growth in demand.
  • The report helps system providers understand the pulse of the market and provides insights into drivers, restraints, opportunities, and challenges.
  • The report will help key players understand the strategies of their competitors better and help them in making better strategic decisions.
Filed in: Chemicals
Publisher : marketsandmarkets
More Reports
Title Price Buy Now

Unidirectional Tapes (UD Tapes) Market by Fiber Type (Glass, Carbon), Resin (Thermoplastic, Thermoset), End-use Industry (Aerospace & Defense, Automotive, Sports & Leisure), and Region (North America, Europe, Asia Pacific) – Global Forecasts to 2025

The UD tapes market is projected to register a CAGR of 11.1%, in terms of value, between 2020 and 2025. The UD tapes market is projected to grow from USD 151.6 million in 2020 to USD 256.7 million by 2025, at a CAGR of 11.1%, between 2020 and 2025. The UD tapes market depends heavily on the performance of aerospace & defense, automotive, and sports & leisure industries. They provide superior properties, such as high tensile strength, high abrasion resistance, wear resistance, high modulus, high strength, high stiffness, low density, chemical resistance, and low creep. The thermoplastic resin segment is expected to hold the largest share of the overall UD tapes market during the forecast period. The thermoplastic resin segment accounted for the largest share of the overall ......
$4950

Electronic Adhesives Market by Form (Liquid, Paste and Solid), by Resin (Epoxy, Silicone), by Product Type, by End-Use Industry (Communications, Computers & Servers, Consumer Electronics, Industrial), by Region – Global Trends and Forecasts to 2025

“The electronic adhesives market is projected to register a CAGR of 6.7% between 2020 and 2025.” The electronic adhesives market is projected to grow from USD 3.6 billion in 2020 to USD 4.9 billion by 2025, at a CAGR of 6.7% between 2020 and 2025. Growth of major end-use industries of electronic adhesives, use of electronic adhesives in various new applications such as waterproof smartphones and wearables devices, 5G technology; and high demand for electronic adhesives in APAC are the major market drivers. “Electrically conductive adhesives product type segment is estimated to be the fastest growing segment of the electronic adhesives market.” Electrically conductive adhesive is expected to grow at the highest CAGR among the electronic adhesives market, in terms of value, ......
$4950

UV Curable Resins and Formulated Products Market by Composition (Oligomers, Monomers, Photoinitiators, Additives), Chemistry (Non-Acrylated Oligoamines, Acrylates), Application, Technology and Region – Global Forecasts to 2025

 “The UV curable resins & formulated products market is projected to register a CAGR of 9.5% during the forecast period, in terms of value.” The global UV curable resins & formulated products market is estimated to be USD 4.2 billion in 2020 and is projected to reach USD 6.6 billion by 2025, at a CAGR of 9.5% from 2020 to 2025. The market is witnessing moderate growth, owing to increasing application, technological advancements, and growing demand for these resins in the Asia Pacific and South America. UV curable resins are largely used in the coating application. The rapid growth of the market is driven by environmental concerns and increasingly stringent regulations. The need to thermally dry sensitive substrates and the high setting-up cost of the UV coatings plant are s......
$4950

Polymer Modified Cementitious Coatings Market by Flexibility, Composition, Polymer Type (Acrylic Polymers, SBR Latex), Application (Non-Residential Buildings, Residential Buildings, Public Infrastructure) and Region – Global Forecast to 2025

The polymer modified cementitious coatings market is projected to grow at a CAGR of 6.5% between 2020 and 2025 The polymer modified cementitious coatings market is estimated at USD 1.1 billion in 2020 and is projected to reach USD 1.5 billion by 2025, at a CAGR of 6.5% from 2020 to 2025.  Increasing government initiatives to support infrastructure development and construction activities in emerging countries of the Asia Pacific region offer lucrative growth opportunities to manufacturers of polymer modified cementitious coatings. Moreover, increasing urbanization in the emerging economies is expected to drive the growth of the market. Impact of COVID-19 outbreak on the polymer modified cementitious coatings market The COVID-19 outbreak started from Wuhan, China has spread across ......
$4950

Fatty Alcohols Market by Type (Short Chain, Pure and Mid Cut, Long Chain, Higher Chain), Application (Industrial & Domestic Cleaning, Personal Care, Plasticizers, Lubricants, Food & Nutrition), and by Region – Global Forecast to 2025

“Increasing demand from personal care and industrial & domestic cleaning applications will drive the overall growth of the fatty alcohols market.” The global fatty alcohols market size is expected to grow from USD 5.4 billion in 2020 to USD 7.0 billion by 2025, at a CAGR of 5.2%, during the forecast period. It is driven by various factors, such as increasing demand for fatty alcohols from personal care, industrial & domestic cleaning, plasticizers, lubricants, and pharmaceutical formulation, among other applications. The growth of these industries is expected to further propel the growth of the market during the forecast period. However, factors, such as surplus production of fatty alcohols leading to oversupply,are likely to hinder the growth of the market. Pure and mid ......
$4950

Paints & Coatings Market by Resin (Acrylic, Alkyd, Epoxy, Polyurethane, Polyester), Technology (Waterborne, Solventborne, Powder), Application (Architectural [Residential, Non-residential], Industrial), and Region – Global Forecasts to 2025

The paints & coatings market is projected to register a CAGR of 4.0%, in terms of value, between 2020 and 2025. The paints & coatings market is projected to grow from USD 147.2 billion in 2020 to USD 179.4 billion by 2025, at a CAGR of 4.0%, between 2020 and 2025. The increasing urban population is a significant factor for the rising demand for building and construction, automotive, packaging. However, stringent government regulations in the paints & coatings industry are hampering the growth of the solvent borne coatings market. The waterborne technology segment is expected to hold the largest share of the overall paints & coatings market during the forecast period. The waterborne technology segment accounted for the largest share of the overall paints & coati......
$4950

Silicone Market by Type (Elastomers, Fluids, Resins, Gels), End-use Industry (Industrial Process, Building & Construction, Personal Care & Consumer Products, Transportation, Electronics, Medical & Healthcare, Energy), Region – Global Forecasts to 2025

Increasing demand from industrial process, building & construction, transportation, and electronics industries is expected to drive the silicone market. The global silicone market size is expected to grow from USD 14.0 billion in 2020 to USD 23.3 billion by 2025, at a CAGR of 10.7% during the forecast period. The silicone market is driven by various factors, such as high demand from industrial process, building & construction, transportation, and electronics industries. The growth of these industries is likely to further propel the market during the forecast period. However, fluctuation in the raw material prices is likely to hinder the growth of the market. The elastomers segment is estimated to drive the global market during the forecast period. The silicone market has b......
$4950

Bromine Market by Derivative (Organobromine, Clear Brine Fluids, Hydrogen Bromide), Application (Flame Retardants, Water Treatment & Biocides, HBR Flow Batteries, Mercury Emission Control, PTA Synthesis), & Geography – Global Forecast to 2025

“The bromine market is projected to grow at a CAGR of 5.0% from 2020 to 2025, in terms of value.” The global bromine market size is projected to grow from USD 3.2 billion in 2020 to USD 4.1 billion by 2025, at a CAGR of 5.0% from 2020 to 2025.The increasing demand for bromine in flame retardants, mercury emission control, water treatment, and oil & gas drilling is expected to drive the bromine market. “The oil & gas application segment is projected to grow at the highest CAGR during the forecast period.” Based on the application, the oil & gas application segment is projected to grow at the highest CARG during the forecast period. Oil & gas is the fastest-growing application of bromine. Clear brine fluids, which is one of the major derivatives of bromine, i......
$4950

Industrial Coatings Market by Resin (Polyurethane, Epoxy, Acrylic, Alkyd), Technology (Solvent-based, Water-based, Powder), End-Use Industry (General Industrial, Protective, Automotive, Aerospace, Wood, Packaging), and Region – Global Forecast to 2025

The industrial coatings market is projected to register a CAGR of 3.9%, in terms of value, between 2020 and 2025. The industrial coatings market size is expected to grow from USD 85.2 billion in 2020 to USD 103.2 billion by 2025, at a CAGR of 3.9% during the forecast period. The increasing demand for environmentally-friendly coatings, the need for efficient process and durable coatings with better aesthetics, and growing demand from the APAC region are expected to drive the industrial coatings market. However, difficulty in obtaining thin films in powder coatings and the requirement of more drying time for water-based coatings are the major restraining factors for the market. Acrylic is projected to be the fastest growing resin chemistry during the forecast period. Acrylic resin-b......
$4950

Agricultural Adjuvants Market by Function (Activator and Utility), Application (Herbicides, Insecticides, and Fungicides), Formulation (Suspension Concentrates and Emulsifiable Concentrates), Adoption Stage, Crop Type, and Region – Global Forecast 2026

The agricultural adjuvants market is projected to grow at a CAGR of 6.1% from 2020 to 2026. The global agricultural adjuvants market size is estimated to be valued at USD 3.1 billion in 2020 and is projected to reach USD 4.4 billion by 2026, recording a CAGR of 6.1%. Factors such as growing demand for crop protection products had also resulted in the development and commercialization of sustainable crop protection solutions, to abide by environmental regulations are projected to drive the growth of this market. The governments shut down borders and economies for restricting the spread of the coronavirus. This resulted in businesses observing major impacts on their international trades. Many markets are focusing on fulfilling their requirements for fertilizers, pesticides, and adjuvan......
$4950
We use cookies to deliver the best possible experience on our website.
By continuing to use this site, or closing this box, you consent to our use of cookies. To learn more, visit our Privacy Policy